Your shopping cart

Adox Polywarmtone emulsion - Gradation: Normal 300 ml concentrate

Chemikalie
Item Nr. 87472
Für weitere Info hier klicken. Artikel: Adox Polywarmtone emulsion - Gradation: Normal 300 ml concentrate
Drag mouse over image for larger view
Für weitere Info hier klicken. Artikel: Adox Polywarmtone emulsion - Gradation: Normal 300 ml concentrate
Drag mouse over image for larger view
Für weitere Info hier klicken. Artikel: Adox Polywarmtone emulsion - Gradation: Normal 300 ml concentrate
Drag mouse over image for larger view
Drag mouse over image for larger view
  • ADOX Polywarmtone Emulsion - Gradation: Normal 300 ml concentrate
  • Gradation: NORMAL
  • DUKA light: Red only
  • Tone value: Warm black

The recipe of this legendary photographic paper from Forte would have been lost in the digital revolution if ADOX had not saved the production technology. After ten years of development work, ADOX has succeeded in recreating this beige-green, high-resolution emulsion with a genuine vintage look and outstanding toning properties.

It is now also available for creating artistic works on various substrates.
The fixed contrast of 2.5 was chosen in order to be able to convert most negatives perfectly.
With a bottle of 300ml you can coat approx. 2.5-3 square meters (depending on the application quantity - specification applies to 1mm wet application).

Pouringwith photo emulsion (open the packaging only in the darkroom under red protective light!):

The liquid photo emulsion is soft and gelatinous in the bottle.
To be able to use it, it must:
1. Be warmed up to approx. 42-45°C
2. After application, dry well in complete darkness (maximum exposure to protective light 2 minutes. ADOX SUPERSAFE maximum 10 minutes)
3. Hardened during processing to withstand mechanical influences/touching

ADHESION
The best binder is ADOX COLLOIDA C photo gelatine. It is easy to process in the light to prepare and later coat all substrates such as paper, glass, textiles or even stones.
ADOX COLLOIDA C is the same high-purity photo gelatine that we use to produce Polywarmtone photo emulsion. Generic gelatines carry a high risk of blurring the emulsion.
ADOX Art Baryta is a pre-coated paper on which the photo emulsion can be applied directly without prior coating.

HARDENER
If you only want to coat paper - without further processing such as toning - you do not necessarily have to use hardener. The emulsion dries and adheres quite well. In most cases, however, it is recommended or necessary to use the hardener ADOX EMH-1. It produces an acidic hardening bath, which replaces the stop bath. If damage to the coating material already occurs in the developer (e.g. with glass plates), it is advisable to carry out the hardening bath before the developer (1-2 minutes). Afterwards, water should be added before development. The hardening process can also be carried out after fixation.

Ware ist bestellt.
46,13 Chemikalie
incl. VAT /
14 days free return shipping.

Adox Polywarmtone emulsion - Gradation: Normal 300 ml concentrate

Short profile

  • ADOX Polywarmtone Emulsion - Gradation: Normal 300 ml concentrate
  • Gradation: NORMAL
  • DUKA light: Red only
  • Tone value: Warm black

Product description for Adox Polywarmtone emulsion - Gradation: Normal 300 ml concentrate

The recipe of this legendary photographic paper from Forte would have been lost in the digital revolution if ADOX had not saved the production technology. After ten years of development work, ADOX has succeeded in recreating this beige-green, high-resolution emulsion with a genuine vintage look and outstanding toning properties.

It is now also available for creating artistic works on various substrates.
The fixed contrast of 2.5 was chosen in order to be able to convert most negatives perfectly.
With a bottle of 300ml you can coat approx. 2.5-3 square meters (depending on the application quantity - specification applies to 1mm wet application).

Pouringwith photo emulsion (open the packaging only in the darkroom under red protective light!):

The liquid photo emulsion is soft and gelatinous in the bottle.
To be able to use it, it must:
1. Be warmed up to approx. 42-45°C
2. After application, dry well in complete darkness (maximum exposure to protective light 2 minutes. ADOX SUPERSAFE maximum 10 minutes)
3. Hardened during processing to withstand mechanical influences/touching

ADHESION
The best binder is ADOX COLLOIDA C photo gelatine. It is easy to process in the light to prepare and later coat all substrates such as paper, glass, textiles or even stones.
ADOX COLLOIDA C is the same high-purity photo gelatine that we use to produce Polywarmtone photo emulsion. Generic gelatines carry a high risk of blurring the emulsion.
ADOX Art Baryta is a pre-coated paper on which the photo emulsion can be applied directly without prior coating.

HARDENER
If you only want to coat paper - without further processing such as toning - you do not necessarily have to use hardener. The emulsion dries and adheres quite well. In most cases, however, it is recommended or necessary to use the hardener ADOX EMH-1. It produces an acidic hardening bath, which replaces the stop bath. If damage to the coating material already occurs in the developer (e.g. with glass plates), it is advisable to carry out the hardening bath before the developer (1-2 minutes). Afterwards, water should be added before development. The hardening process can also be carried out after fixation.

Adox Polywarmtone emulsion - Gradation: Normal 300 ml concentrate

EAN and KAN KAN
EAN
4260243554593
KAN
67036

Also interesting

The new snapshot is here!

The latest issue of Schnappschuss' is all about Behind the Scenes!

Read now!

First test of the Sony 16-35mm f2.8 GM2 compared to the 16-35 GM1

The new Sony 16-35mm GM2 is here and sets new standards! It is lighter, sharper and even more compact than its predecessor! Therefore, we show you today the direct comparison of the two G-Master lenses and show whether an upgrade is worth it!

Read now

First test of the Sony 16-35mm f2.8 GM2 compared to the 16-35 GM1

The new Sony 16-35mm GM2 is here and sets new standards! It is lighter, sharper and even more compact than its predecessor! Therefore, we'll show you the direct comparison of the two G-Master lenses and tell you whether an upgrade is worth it!

Read now

Difference between contrast, phase hybrid autofocus

Autofocus takes a lot of the work out of photography; of course, there are also purists who like to focus manually.

learn more

Camera Basics #13: CMOS, BSI sensor or stacked sensor? What are the differences?

As a specialist retailer, we have a mission: we want to give you the best possible advice and help you to better understand the differences between the various technologies available on the camera market. That's why we want to give you an understanding of the different sensor technologies today. In particular, the differences between the stacked sensor and the BSI sensor.

Read now

Leasing for business customers

For those who do not want to buy the equipment directly, we also offer leasing. Business customers can choose a flexible leasing period and take over the goods at the end.

learn more

Guide for shooting stars photography

In this article we want to show you how you can easily photograph shooting stars. Use the current shooting star shower to take your first pictures.

Read now

Treasure trove for cameras, lenses more

If you are on a treasure hunt, you will find one or the other treasure in our treasure trove.

view now